COPYRIGHT ©2015 QIDAPACKGAING ALL RIGHTS RESERVED.
Powered by www.300.cn
The corrugated board assembly line tells you the structure of the corrugated board production line
Production management system
The production management system should have complete production data collection, statistics and print output in addition to monitoring the production site. For example: the printing of production scheduling sheet, the printing of paper preparation sheet and the printing of production label. The production label requires the buyer and the supplier to require the output form to be consistent with the format of their own manufacturer, and to have full functions in the purchased production management system. In many cases, there is no configuration, and they have to pay for it later.
Equipment configuration of wet section
The wet part equipment in the whole corrugated board production line is the key equipment of corrugated forming, which mainly involves the influence of raw paper, glue, steam and other factors on the paper forming quality. The key equipment of wet part single face corrugating machine should select the advanced technology equipment, positive pressure card box type single face machine. It is very important to adjust the value of the gap and control the amount of glue.
Cadre equipment configuration
In the cadre equipment, slitting machine is the equipment that affects working efficiency, its choice is very important. In the longitudinal cutting machine, the knife should be removable, and the dustproof treatment of the cutter and the pressure line guide should be taken into account when selecting Taiwan tile line, because in the actual use, the dust of the grinding knife will fall on the smooth guide rail, causing the knife or the pressure line wheel to move during the row of the cutter, and the phenomenon of frequent stopping. The minimum spacing between the pressure line wheels shall guarantee the positioning method of the 50mm knife line and the actual value of the accuracy of the row knife. However, in practice, the error of 1-2mm will occur. Therefore, it is necessary to check frequently and the efficiency is low. Several methods of pressure line wheel can meet the requirements of multi-medium pressure line type.