Working principle of single corrugated cardboard production line
corrugated carton products are a type of products with large input and large output. Considering the increased cost of freight and the timeliness of delivery, the market area of this type of product is destined to not cover a large range.
First, a good product market research is the basis for equipment selection
corrugated carton products are a type of products with large input and large output. Considering the increased cost of freight and the timeliness of delivery, the market area of this type of product is destined to not cover a large range. The market scope is usually locked within a radius of 200 kilometers. Therefore, decision makers must investigate the main specifications and flute shapes of major potential customers around them, and have a good idea to provide a basis for the next decision.
Second, consider the compatibility of the overall coordination of the corrugated cardboard production line
The selection principle of the medium and high speed corrugated board production line is to consider the degree of automation of each single machine, and pay more attention to the overall matching and coordination of the corrugated board production line. Since a high-speed production line is selected, the configuration that matches the entire line with a high degree of automation should be selected.
Third, focus on the criticality of choosing core components
Several important technical points of corrugating roller
For high-speed machines, the diameter of a single-sided machine is usually not less than 320mm, otherwise, the speed is difficult to increase. Under normal circumstances, the diameter of the corrugated roller should be above 375mm.
The most commonly used single-sided machines on the market are mostly non-paste fork external suction vacuum single-sided machines or positive pressure cassette single-sided machines. In actual operation, the matching pressure (matching gap) and parallelism of the corrugated rollers must be controlled. Temperature, surface temperature, and select the appropriate medium and high.
vertical and horizontal machine tool